You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

17 KiB

Fast Static Site with make

This article will dig a bit deeper about my Makefile based static website generator. In a previous article I just gave the rationale and an overview to do it yourself. Mainly it is very fast and portable.

A few goals reached by my current build system are:

  1. Be fast and make the minimal amount of work as possible. I don't want to rebuild all the html pages if I only change one file.

  2. Source file format agnostic. You can use markdown, org-mode or even directly write html.

  3. Support gemini

  4. Optimize size: minify HTML, CSS, images

  5. Generate an index page listing the posts

  6. Generate RSS/atom feed (for both gemini and http)

make will take care of handling the dependency graph to minimize the amount of effort when a change occurs in the sources. For some features, I built specifics small shell scripts. For example to be absolutely agnostic in the source format for my articles I generate the RSS out of a tree of HTML files. But taking advantage of make, I generate an index cache to transform those HTML into XML which will be faster to use to build different indexes. To make those transformations I use very short a shell scripts.

Makefile overview

A Makefile is made out of rules. The first rule of your Makefile will be the default rule. The first rule of my Makefile is called all.

A rule as the following format:

target: file1 file2
	cmd --input file1 file2 \
		--output target

if target does not exists, then make will look at its dependencies. If any of its dependencies need to be updated, it will run all the rules in the correct order to rebuild them and finally run the script to build target. A file needs to be updated if one of its dependency needs to be updated or is newer.

The usual use case of make is about building a single binary out of many source files. But for a static website, we need to generate a lot of files from a lot of files. So we construct the rules like this:

all: site

# build a list of files that will need to be build
DST_FILES := ....
# RULES TO GENERATE DST_FILES
ALL += $(DST_FILES)

# another list of files
DST_FILES_2 := ....
# RULES TO GENERATE DST_FILES_2
ALL += $(DST_FILES_2)

site: $(ALL)

In my Makefile I have many similar block with the same pattern.

  1. I retrieve a list of source files

  2. I construct the list of destination files (change the directory, the extension)

  3. I declare a rule to construct these destination files

  4. I add the destination files to the ALL variable.

I have a block for:

  • raw assets I just want copied

  • images I would like to compress for the web

  • html I would like to generate from org mode files via pandoc

  • gmi I would like to generate from org mode files

  • xml files I use as cache to build different index files

  • index.html file containing a list of my posts

  • rss.xml file containing a list of my posts

  • gemini-atom.xml file containing a list of my posts

Assets

The rules to copy assets will be a good first example.

  1. find all assets in src/ directory

  2. generate all assets from these files in _site/ directory

  3. make this rule a dependency on the all rule.

SRC_ASSETS := $(shell find src -type f)
DST_ASSETS := $(patsubst src/%,_site/%,$(SRC_ASSETS))
_site/% : src/%
	@mkdir -p "$(dir $@)"
	cp "$<" "$@"
.PHONY: assets
assets: $(DST_ASSETS)
ALL += assets

OK, this looks terrible. But mainly:

  • SRC_ASSETS will contain the result of the command find.

  • DST_ASSETS will contain the files of SRC_ASSETS but we replace the src/ by _site/.

  • We create a generic rule; for all files matching the following pattern _site/%, look for the file src/% and if it is newer (in our case) then execute the following commands:

    • create the directory to put _site/% in

    • copy the file

About the line @mkdir -p "$(dir $@)":

  • the @ at the start of the command simply means that we make this execution silent.

  • The $@ is replaced by the target string.

  • And $(dir $@) will generate the folder name of $@.

For the line with cp, you just need to know that ~$<~ will represent the first dependency.

My Makefile is composed of similar blocks, where I replace the first find command to match specific files and where I use different building rules. An important point is that the rules must be the most specific possible. This is because make will use the most specific rule in case of ambiguity. For example, the matching rule _site/%: src/% will match all files in the src/ dir. But if we want to treat CSS files with another rule we could write:

_site/%.css: src/%.css
	minify "$<" "$@"

And if the selected file is a CSS file, this rule will be selected.

Prelude

I start with variables declarations:

all: site
# directory containing the source files
SRC_DIR ?= src
# directory that will contain the site files
DST_DIR ?= _site
# a directory that will contain a cache to speedup indexing
CACHE_DIR ?= .cache

# options to pass to find to prevent matching files in the src/drafts
# directory
NO_DRAFT := -not -path '$(SRC_DIR)/drafts/*'
# option to pass to find to not match  org files
NO_SRC_FILE := ! -name '*.org'

CSS

Here we go; the same simple pattern for CSS files.

# CSS
SRC_CSS_FILES := $(shell find $(SRC_DIR) -type f -name '*.css')
DST_CSS_FILES := $(patsubst $(SRC_DIR)/%,$(DST_DIR)/%,$(SRC_RAW_FILES))
$(DST_DIR)/%.css : $(SRC_DIR)/%.css
	@mkdir -p "$(dir $@)"
	minify "$<" > "$@"
.PHONY: css
css: $(DST_CSS_FILES)
ALL += css

This is very similar to the block for raw assets. The difference is just that instead of using cp we use the minify command.

ORG → HTML

Now this one is more complex but is still follow the same pattern.

# ORG -> HTML
EXT ?= .org
SRC_PANDOC_FILES ?= $(shell find $(SRC_DIR) -type f -name "*$(EXT)" $(NO_DRAFT))
DST_PANDOC_FILES ?= $(patsubst %$(EXT),%.html, \
                        $(patsubst $(SRC_DIR)/%,$(DST_DIR)/%, \
                            $(SRC_PANDOC_FILES)))
PANDOC_TEMPLATE ?= templates/post.html
MK_HTML := engine/mk-html.sh
PANDOC := $(MK_HTML) $(PANDOC_TEMPLATE)
$(DST_DIR)/%.html: $(SRC_DIR)/%.org $(PANDOC_TEMPLATE) $(MK_HTML)
	@mkdir -p "$(dir $@)"
	$(PANDOC) "$<" "$@.tmp"
	minify --mime text/html "$@.tmp" > "$@"
	@rm "$@.tmp"
.PHONY: html
html: $(DST_PANDOC_FILES)
ALL += html

So to construct DST_PANDOC_FILES this time we also need to change the extension of the file from org to html. We need to provide a template that will be passed to pandoc.

And of course, as if we change the template file we would like to regenerate all HTML files we put the template as a dependency. But importantly not at the first place. Because we use $< that will be the first dependency.

I also have a short script instead of directly using pandoc. It is easier to handle toc using the metadatas in the file. And if someday I want to put the template in the metas, this will be the right place to put that.

The mk-html.sh is quite straightforward:

#!/usr/bin/env bash
set -eu

# put me at the top level of my project (like Makefile)
cd "$(git rev-parse --show-toplevel)" || exit 1
template="$1"
orgfile="$2"
htmlfile="$3"

# check if there is the #+OPTIONS: toc:t
tocoption=""
if grep -ie '^#+options:' "$orgfile" | grep 'toc:t'>/dev/null; then
    tocoption="--toc"
fi

set -x
pandoc $tocoption \
       --template="$template" \
       --mathml \
       --from org \
       --to html5 \
       --standalone \
       $orgfile \
       --output "$htmlfile"

Once generated I also minify the html file. And, that's it. But the important part is that now, if I change my script or the template or the file, it will generate the dependencies.

Indexes

We often need indexes to build a website. Typically to list the latest articles, build the RSS file. So for sake of simplicity, I decided to build my index as a set of XML files. Of course, this could be optimizide, by using SQLite for example. But this will already be really fast.

For every generated html file I will generate a clean XML file with hxclean. Once cleaned, it will be easy to access a specific node of in these XML files.

# INDEXES
SRC_POSTS_DIR ?= $(SRC_DIR)/posts
DST_POSTS_DIR ?= $(DST_DIR)/posts
SRC_POSTS_FILES ?= $(shell find $(SRC_POSTS_DIR) -type f -name "*$(EXT)")
RSS_CACHE_DIR ?= $(CACHE_DIR)/rss
DST_XML_FILES ?= $(patsubst %.org,%.xml, \
                        $(patsubst $(SRC_POSTS_DIR)/%,$(RSS_CACHE_DIR)/%, \
                            $(SRC_POSTS_FILES)))
$(RSS_CACHE_DIR)/%.xml: $(DST_POSTS_DIR)/%.html
	@mkdir -p "$(dir $@)"
	hxclean "$<" > "$@"
.PHONY: indexcache
indexcache: $(DST_XML_FILES)
ALL += indexcache

This rule will generate for every file in site/posts/*.html a corresponding xml file (hxclean takes an HTML an try its best to make an XML out of it).

HTML Index

Now we just want to generate the main index.html page at the root of the site. This page should list all articles by date in reverse order.

The first step is to take advantage of the cache index. For every XML file I generated before I should generate the small HTML block I want for every entry. For this I use a script mk-index-entry.sh. He will use hxselect to retrieve the date and the title from the cached XML files. Then generate a small file just containing the date and the link.

Here is the block in the Makefile:

DST_INDEX_FILES ?= $(patsubst %.xml,%.index, $(DST_XML_FILES))
MK_INDEX_ENTRY := ./engine/mk-index-entry.sh
INDEX_CACHE_DIR ?= $(CACHE_DIR)/rss
$(INDEX_CACHE_DIR)/%.index: $(INDEX_CACHE_DIR)/%.xml $(MK_INDEX_ENTRY)
	@mkdir -p $(INDEX_CACHE_DIR)
	$(MK_INDEX_ENTRY) "$<" "$@"

It means: for every .xml file generate a .index file with mk-index-entry.sh.

#!/usr/bin/env zsh

# prelude
cd "$(git rev-parse --show-toplevel)" || exit 1
xfic="$1"
dst="$2"
indexdir=".cache/rss"

# HTML Accessors (similar to CSS accessors)
dateaccessor='.yyydate'
# title and keyword shouldn't be changed
titleaccessor='title'
finddate(){ < $1 hxselect -c $dateaccessor | sed 's/\[//g;s/\]//g;s/ .*$//' }
findtitle(){ < $1 hxselect -c $titleaccessor }

autoload -U colors && colors

blogfile="$(echo "$xfic"|sed 's#.xml$#.html#;s#^'$indexdir'/#posts/#')"
printf "%-30s" $blogfile
d=$(finddate $xfic)
echo -n " [$d]"
rssdate=$(formatdate $d)
title=$(findtitle $xfic)
keywords=( $(findkeywords $xfic) )
printf ": %-55s" "$title ($keywords)"
{ printf "\\n<li>"
  printf "\\n<span class=\"pubDate\">%s</span>" "$d"
  printf "\\n<a href=\"%s\">%s</a>" "${blogfile}" "$title"
  printf "\\n</li>\\n\\n"
} >> ${dst}

echo " [${fg[green]}OK${reset_color}]"

Then I use these intermediate files to generate a single bigger index file.

HTML_INDEX := $(DST_DIR)/index.html
MKINDEX := engine/mk-index.sh
INDEX_TEMPLATE ?= templates/index.html
$(HTML_INDEX): $(DST_INDEX_FILES) $(MKINDEX) $(INDEX_TEMPLATE)
	@mkdir -p $(DST_DIR)
	$(MKINDEX)
.PHONY: index
index: $(HTML_INDEX)
ALL += index

This script is a big one, but it is not that complex. For every file, I generate a new file DATE-dirname. I sort them in reverse order and put their content in the middle of an HTML file.

Important note: this file updates only if the index change.

The first part of the script creates files with the creation date in their metadatas. The created file name will contain the creation date, this will be helpful later.

#!/usr/bin/env zsh

autoload -U colors && colors
cd "$(git rev-parse --show-toplevel)" || exit 1
# Directory
webdir="_site"
indexfile="$webdir/index.html"
indexdir=".cache/rss"
tmpdir=$(mktemp -d)

echo "Publishing"

dateaccessor='.pubDate'
finddate(){ < $1 hxselect -c $dateaccessor }
# generate files with <DATE>-<FILENAME>.index
for fic in $indexdir/**/*.index; do
    d=$(finddate $fic)
    echo "${${fic:h}:t} [$d]"
    cp $fic $tmpdir/$d-${${fic:h}:t}.index
done

Then I use these files to generate a file that will contain the body of the HTML.

# for every post in reverse order
# generate the body (there is some logic to group by year)
previousyear=""
for fic in $(ls $tmpdir/*.index | sort -r); do
    d=$(finddate $fic)
    year=$( echo "$d" | perl -pe 's#(\d{4})-.*#$1#')
    if (( year != previousyear )); then
        if (( previousyear > 0 )); then
            echo "</ul>" >> $tmpdir/index
        fi
        previousyear=$year
        echo "<h3 name=\"${year}\" >${year}</h3><ul>" >> $tmpdir/index
    fi
    cat $fic >> $tmpdir/index
done
echo "</ul>" >> $tmpdir/index

And finally, I render the HTML using a template within a shell script:

title="Y"
description="Most recent articles"
author="Yann Esposito"
body=$(< $tmpdir/index)
date=$(LC_TIME=en_US date +'%Y-%m-%d')

# A neat trick to use pandoc template within a shell script
# the pandoc templates use $x$ format, we replace it by just $x
# to be used with envsubst
template=$(< templates/index.html | \
    sed 's/\$\(header-includes\|table-of-content\)\$//' | \
    sed 's/\$if.*\$//' | \
    perl -pe 's#(\$[^\$]*)\$#$1#g' )
{
    export title
    export author
    export description
    export date
    export body
    echo ${template} | envsubst
} > "$indexfile"

rm -rf $tmpdir
echo "* HTML INDEX [done]"

RSS

My RSS generation is similar to the system I used to generate the index file. I just slightly improved the rules.

The Makefile blocks look like:

# RSS
DST_RSS_FILES ?= $(patsubst %.xml,%.rss, $(DST_XML_FILES))
MK_RSS_ENTRY := ./engine/mk-rss-entry.sh
$(RSS_CACHE_DIR)/%.rss: $(RSS_CACHE_DIR)/%.xml $(MK_RSS_ENTRY)
	@mkdir -p $(RSS_CACHE_DIR)
	$(MK_RSS_ENTRY) "$<" "$@"

RSS := $(DST_DIR)/rss.xml
MKRSS := engine/mkrss.sh
$(RSS): $(DST_RSS_FILES) $(MKRSS)
	$(MKRSS)

.PHONY: rss
rss: $(RSS)
ALL += rss

Gemini

I wrote a minimal script to transform my org files to gemini files. I also need to generate an index and an atom file for gemini:

# ORG -> GEMINI
EXT := .org
SRC_GMI_FILES ?= $(shell find $(SRC_DIR) -type f -name "*$(EXT)" $(NO_DRAFT))
DST_GMI_FILES ?= $(subst $(EXT),.gmi, \
                        $(patsubst $(SRC_DIR)/%,$(DST_DIR)/%, \
                            $(SRC_GMI_FILES)))
GMI := engine/org2gemini.sh
$(DST_DIR)/%.gmi: $(SRC_DIR)/%.org $(GMI) engine/org2gemini_step1.sh
	@mkdir -p $(dir $@)
	$(GMI) "$<" "$@"
ALL += $(DST_GMI_FILES)
.PHONY: gmi
gmi: $(DST_GMI_FILES)

# GEMINI INDEX
GMI_INDEX := $(DST_DIR)/index.gmi
MK_GMI_INDEX := engine/mk-gemini-index.sh
$(GMI_INDEX): $(DST_GMI_FILES) $(MK_GMI_INDEX)
	@mkdir -p $(DST_DIR)
	$(MK_GMI_INDEX)
ALL += $(GMI_INDEX)
.PHONY: gmi-index
gmi-index: $(GMI_INDEX)

# RSS
GEM_ATOM := $(DST_DIR)/gem-atom.xml
MK_GEMINI_ATOM := engine/mk-gemini-atom.sh
$(GEM_ATOM): $(DST_GMI_FILES) $(MK_GEMINI_ATOM)
	$(MK_GEMINI_ATOM)
ALL += $(GEM_ATOM)
.PHONY: gmi-atom
gmi-atom: $(GMI_ATOM)

.PHONY: gemini
gemini: $(DST_GMI_FILES) $(GMI_INDEX) $(GEM_ATOM)

Images

For images, I try to compress them all with imagemagick.

# Images
SRC_IMG_FILES ?= $(shell find $(SRC_DIR) -type f -name "*.jpg" -or -name "*.jpeg" -or -name "*.gif" -or -name "*.png")
DST_IMG_FILES ?= $(patsubst $(SRC_DIR)/%,$(DST_DIR)/%, $(SRC_IMG_FILES))

$(DST_DIR)/%.jpg: $(SRC_DIR)/%.jpg
	@mkdir -p $(dir $@)
	convert "$<" -quality 50 -resize 800x800\> "$@"

$(DST_DIR)/%.jpg: $(SRC_DIR)/%.jpeg
	@mkdir -p $(dir $@)
	convert "$<" -quality 50 -resize 800x800\> "$@"

$(DST_DIR)/%.gif: $(SRC_DIR)/%.gif
	@mkdir -p $(dir $@)
	convert "$<" -quality 50 -resize 800x800\> "$@"

$(DST_DIR)/%.png: $(SRC_DIR)/%.png
	@mkdir -p $(dir $@)
	convert "$<" -quality 50 -resize 800x800\> "$@"

.PHONY: img
img: $(DST_IMG_FILES)
ALL += $(DST_IMG_FILES)

Deploy

A nice bonus is that I also deploy my website using make.

# DEPLOY
.PHONY: site
site: $(ALL)

.PHONY: deploy
deploy: $(ALL)
	engine/sync.sh

.PHONY: clean
clean:
	-[ ! -z "$(DST_DIR)" ] && rm -rf $(DST_DIR)/*
	-[ ! -z "$(CACHE_DIR)" ] && rm -rf $(CACHE_DIR)/*